Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2006 Nissan Altima- Video
Today in this 2006 Nissan Altima we're going to install part number 56146KIT from Curt. To install our wire harness we need to go ahead and open up the trunk to get access to the wiring on the driver's side. To get access to our wiring we're going to have to move the carpet out of the way a little bit. We can simply fold this down. Eventually we're going to have to run a power wire out to our battery so we'll go ahead and remove the floor panels, or at least move them out of the way to get access to the floor. The next thing we're going to do is test our wires. To do that we're going to need a ground to test with. more
6/24/2014 4:48:27 AM
Trailer Wiring Harness Installation - 2006 Nissan Altima 118151- Video
Today on this 2006 Nissan Altima we are going to install part number 119176 from Tow Ready. The first thing we need to do is get access to the trunk area of the vehicle. We need to pull back some of the interior components so we can get to the wiring. We removed the flooring material, now we are going to take off this panel right here. It is assembled along the top edge here but you can just pull on it and it should pop out. We will do the same thing with the plastic rivets here and here and get closer to the wiring. We can see where our main wire harness comes down through here and this goes on to the passenger side of the vehicle and this one goes straight to the driver side tail light. So we can get access to our wiring here and here. 00:49 more
11/12/2010 4:13:18 AM
Filter Videos
Filter Videos
